“Rip-cut blocking from 2 × 6 framing lumber to span the gap between the inner and outer skins of the door. Cut to length, glue and clamp the blocking in place around perimeter of the hole. Re-drill the bolt holes… — David Griffin Copy Share Image
“DRILL BOLT HOLES AND CUT OPENING IN DOOR Drill prescribed boltholes. Next drill starter holes just inside the corners of the cutout rectangle for… — David Griffin Copy Share Image
“Rip-cut blocking from 2 × 6 framing lumber to span the gap between the inner and outer skins of the door. Cut to length,… — David Griffin Copy Share Image
“To keep your human door sturdy, be careful not to cut within 3" of the bottom.” — David Griffin Copy Share Image
