In the Leach Pottery we did most of our work on the wheel…
![“In the Leach Pottery we did most of our work on the wheel. [Bernard] Leach did a little work in the studio, which was press-molded forms, plastic clay pressed into plaster forms to make small rectangular boxes and some vase forms, which he liked to make. These were molds which had been made to an…” quote by Warren MacKenzie](https://sms4smile.com/q/i/3a8/warren-mackenzie-4654_boxes_in-the-leach-pottery-we-did-most-of-our_447338.jpg)
“In the Leach Pottery we did most of our work on the wheel. [Bernard] Leach did a little work in the studio, which was press-molded forms, plastic clay pressed into plaster forms to make small rectangular boxes and some vase forms, which he liked to make. These were molds which had been made to an original that he had modeled in solid clay, and during our work there, sometimes I would be pressing these forms as a means of production.”
About This Quote
This interpretation was drafted with AI assistance. It is one reading of the quote, not the author's own explanation.
The quote describes how Bernard Leach primarily used a potter’s wheel for his work, but also employed press‑mold techniques for certain shapes, highlighting a blend of traditional and experimental methods.
In simple terms: Leach mainly used the wheel, but also press‑molded some pieces.
Key Takeaway
Combine wheel and mold techniques for varied pottery.
Themes
craftsmanship
technique
tradition
innovation
Mood
reflective
inquisitive
Type
practical
inspirational
When to use this quote
- studio practice
- teaching pottery
- product development
- artistic experimentation
- production efficiency
Key Concepts
ceramics
process design
material manipulation
Questions to Reflect On
- How do you balance efficiency with artistic authenticity?
- When is press‑molding preferable to wheel‑throwing?
A Different Perspective
Molded pieces may lack the unique touch of hand‑thrown ware.