---
title: "Meaning & Key Takeaway of: Step 2: Build the LED-Controlling Circuit…"
description: "\"“Step 2: Build the LED-Controlling Circuit Now, you’re going to connect the 4017 decade counter with resistors and LEDs. There are a lot of connections..."
image: "https://sms4smile.com/quotes/i/772/oyvind-nydal-dahl-21883_long-jump_step-2-build-the-led-controlling-circuit_2650352.jpg"
---

#  Step 2: Build the LED-Controlling Circuit Now, you’re…

![“Step 2: Build the LED-Controlling Circuit Now, you’re going to connect the 4017 decade counter with resistors and LEDs. There are a lot of connections, so take as much time as you need to get them all correct. Plug the 4017 decade counter into the breadboard so that the middle of the decade…” quote by Oyvind Nydal Dahl](https://sms4smile.com/quotes/i/772/oyvind-nydal-dahl-21883_long-jump_step-2-build-the-led-controlling-circuit_2650352.jpg)   [Download](https://sms4smile.com/quotes/i/772/oyvind-nydal-dahl-21883_long-jump_step-2-build-the-led-controlling-circuit_2650352.jpg) [Open image](https://sms4smile.com/quotes/i/772/oyvind-nydal-dahl-21883_long-jump_step-2-build-the-led-controlling-circuit_2650352.jpg)

> ““Step 2: Build the LED-Controlling Circuit Now, you’re going to connect the 4017 decade counter with resistors and LEDs. There are a lot of connections, so take as much time as you need to get them all correct. Plug the 4017 decade counter into the breadboard so that the middle of the decade counter is around row 20, with the chip marker pointing up toward row 1. Then, take out five LEDs and ten 100 Ω resistors. Connect each LED’s negative (short) leg to the negative supply column on the right, and connect each positive (long) leg to its own empty row in the component area on the right. Place the green LED in the middle, the two blue ones on each side of the green LED, and the red ones on each end. Then, connect the ten 100 Ω resistors. In the circuit diagram, notice that pins 1 to 7 and pins 9 to 11 of the 4017 decade counter each connect to one side of a resistor. The other side of each resistor needs to be on a row by itself. Take care to ensure the resistor legs don’t accidentally touch one another. Look at the following breadboard circuit to see how I connected them: Now, connect the LEDs to the resistors on the 4017 decade counter, and connect the decade counter circuit to the 555 timer circuit according to the circuit diagram. Jumper wires are the best way to make those connections. From each resistor, connect a jumper wire to the corresponding LED. Look at the circuit diagram and notice, for example, that the other side of the resistor connected to pin 4 of the 4017 decade counter should connect to the positive pin of the green LED in the middle. Go through the pins in the circuit diagram to figure out which LED to connect each resistor to. Connect pins 8 and 15 of the 4017 decade counter to the negative supply column, and connect pin 16 to the positive supply column. Use a wire to connect the output from the 555 timer (pin 3) to the clock input of the 4017 decade counter (pin 14). Make sure that you have positive and negative connections in all of your power supply columns. The breadboard I recommend in this project’s Shopping List (page 267) divides its power supply columns into two sections, one upper and one lower. Just connect each of the upper and lower halves on the left side with a wire to bridge the gap, as shown. Do the same on the right side. Alternatively, use two jumper wires from the left columns to the right columns. You can use a jumper wire, or you can cut off a small piece of wire, as I’ve done in this photo. Then, use two long jumper wires to connect the lower-left power supply columns with the two lower-right columns. When you’re done connecting the two circuits and all the power supply columns, your breadboard should look like this:””

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

## About This Quote

This interpretation was drafted with AI assistance. It is one reading of the quote, not the author's own explanation.

The passage gives step‑by‑step instructions for wiring a 4017 decade counter with LEDs and resistors on a breadboard, emphasizing careful placement and connections to ensure proper operation.

**In simple terms:** Detailed wiring guide for a LED circuit using a 4017 counter and 555 timer.

Key Takeaway

Follow the guide precisely to build a functional LED controller.

Themes

electronics DIY circuit design hands‑on learning

Mood

focused methodical

Type

instructional technical

When to use this quote

- electronics hobbyists
- education labs
- prototype development

Key Concepts

breadboard layout resistor‑LED connections clock synchronization

Questions to Reflect On

- How will you verify each connection before powering the circuit?
- What troubleshooting steps will you take if LEDs don’t light?

A Different Perspective

Miswiring can cause shorts or non‑functional circuits.

★ ★ ★ ★ ★   No ratings yet

[Build Led](https://sms4smile.com/quotes/about/build-led-2345269/) [Connect Led](https://sms4smile.com/quotes/about/connect-led-2345267/) [Connect Leds](https://sms4smile.com/quotes/about/connect-leds-2345268/) [Led Connect](https://sms4smile.com/quotes/about/led-connect-2345265/) [Long jump](https://sms4smile.com/quotes/about/long-jump/) [Resistors 4017](https://sms4smile.com/quotes/about/resistors-4017-2345266/) [Right place](https://sms4smile.com/quotes/about/right-place/) [Right side](https://sms4smile.com/quotes/about/right-side/)

## Related quotes

> [In meditation you withdraw from others and focus your attention inside to gain purity of mind and wisdom energy. Then you must become extroverted…](https://sms4smile.com/quotes/s-n-goenka/in-meditation-you-withdraw-from-others-and-focus-your-attention/)

[S. N. Goenka](https://sms4smile.com/quotes/author/s-n-goenka/)

> [We crave instant success these days. If you are a really good sprinter and long jumper, you don't want to spend two or three…](https://sms4smile.com/quotes/daley-thompson/we-crave-instant-success-these-days-if-you-are-a-really-good-sprinter/)

[Daley Thompson](https://sms4smile.com/quotes/author/daley-thompson/)

> [We always spend more time on the throwing events and a little bit more on the long jump. They're my weaker events - they…](https://sms4smile.com/quotes/jessica-ennis/we-always-spend-more-time-on-the-throwing-events-and-a-little-bit/)

[Jessica Ennis](https://sms4smile.com/quotes/author/jessica-ennis/)

> [Monkey can make a long jump with his muscles; and man, with his wisdom!](https://sms4smile.com/quotes/mehmet-murat-ildan/monkey-can-make-a-long-jump-with-his-muscles-and-man-with-his-wisdom/)

[Mehmet Murat Ildan](https://sms4smile.com/quotes/author/mehmet-murat-ildan/)

> [In England I played everything - swimming, athletics, football, rugby, badminton, cricket - all of that stuff. I was in the first teams for…](https://sms4smile.com/quotes/chris-eubank-jr/in-england-i-played-everything-swimming-athletics-football-rugby/)

[Chris Eubank Jr](https://sms4smile.com/quotes/author/chris-eubank-jr/)

> [I honestly feel that because Steve has passed, you know, it's like when Biggie passed and Jay-Z was allowed to become Jay-Z.](https://sms4smile.com/quotes/kanye-west/i-honestly-feel-that-because-steve-has-passed-you-know-it-s-like-when/)

[Kanye West](https://sms4smile.com/quotes/author/kanye-west/)

> [To be honest, I was focusing more on playing for Godmanchester Rovers than I was doing the long jump for England.](https://sms4smile.com/quotes/darren-bent/to-be-honest-i-was-focusing-more-on-playing-for-godmanchester-rovers/)

[Darren Bent](https://sms4smile.com/quotes/author/darren-bent/)

> [I think what Kanye West is going to mean is something similar to what Steve Jobs means.](https://sms4smile.com/quotes/kanye-west/i-think-what-kanye-west-is-going-to-mean-is-something-similar-to-what/)

[Kanye West](https://sms4smile.com/quotes/author/kanye-west/)

> [I've been blessed with the athleticism that I've got. I've worked a little bit to try and fine-tune certain aspects - my pace, leap,…](https://sms4smile.com/quotes/dominic-calvert-lewin/i-ve-been-blessed-with-the-athleticism-that-i-ve-got-i-ve-worked-a/)

[Dominic Calvert-Lewin](https://sms4smile.com/quotes/author/dominic-calvert-lewin/)

> [I got a third-degree ankle sprain practicing long jump. I never fully recovered. That was my first heartbreak. I thought track was going to…](https://sms4smile.com/quotes/michelle-wolf/i-got-a-third-degree-ankle-sprain-practicing-long-jump-i-never-fully/)

[Michelle Wolf](https://sms4smile.com/quotes/author/michelle-wolf/)

> [I led the world the whole year until the trials. I was in Birmingham, U.K. Broke the meet record, had the meet won already,…](https://sms4smile.com/quotes/marquise-goodwin/i-led-the-world-the-whole-year-until-the-trials-i-was-in-birmingham-u/)

[Marquise Goodwin](https://sms4smile.com/quotes/author/marquise-goodwin/)

> [My participation in the Art of the Olympians is a natural extension of my athletic career. I find creating a piece of art in…](https://sms4smile.com/quotes/bob-beamon/my-participation-in-the-art-of-the-olympians-is-a-natural-extension/)

[Bob Beamon](https://sms4smile.com/quotes/author/bob-beamon/)

> [I used to wear long jumpers, but they made me look like a bag tied up in the middle.](https://sms4smile.com/quotes/darcey-bussell/i-used-to-wear-long-jumpers-but-they-made-me-look-like-a-bag-tied-up/)

[Darcey Bussell](https://sms4smile.com/quotes/author/darcey-bussell/)

> [I know I'm a dog. I'm a beast especially when it comes to long jump.](https://sms4smile.com/quotes/marquise-goodwin/i-know-i-m-a-dog-i-m-a-beast-especially-when-it-comes-to-long-jump/)

[Marquise Goodwin](https://sms4smile.com/quotes/author/marquise-goodwin/)

> [ I have seen quite a few folk whom I know to be both fair minded and, as it happens,\[Bob\] Dylan fans, take up cudgels… ](https://sms4smile.com/quotes/david-bennun/i-have-seen-quite-a-few-folk-whom-i-know-to-be-both-fair-minded-and/)

[David Bennun](https://sms4smile.com/quotes/author/david-bennun/)

## More by Oyvind Nydal Dahl

> [“Check the Continuity First, check that you don’t have a short circuit between the positive and negative columns. To do this, use the continuity…](https://sms4smile.com/quotes/oyvind-nydal-dahl/check-the-continuity-first-check-that-you-don-t-have-a-short-circuit/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Step 4: Practice Your Reaction Time! All that’s left is to connect the battery to the supply columns. The button at the bottom of…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-4-practice-your-reaction-time-all-that-s-left-is-to-connect-the/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“NOTE Many electronics enthusiasts also call continuity mode beep mode.”](https://sms4smile.com/quotes/oyvind-nydal-dahl/note-many-electronics-enthusiasts-also-call-continuity-mode-beep-mode/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“MEET THE REACTION GAME CIRCUITS The reaction game will consist of three circuits: A 555 timer circuit that determines the speed of the game…](https://sms4smile.com/quotes/oyvind-nydal-dahl/meet-the-reaction-game-circuits-the-reaction-game-will-consist-of/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“ADD A BUZZER TO YOUR GAME Congratulations: You’ve finished the last project in the book! Now, it’s up to you to decide what to…](https://sms4smile.com/quotes/oyvind-nydal-dahl/add-a-buzzer-to-your-game-congratulations-you-ve-finished-the-last/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Before you move on to the next step, check that this circuit is working by connecting an LED with a resistor to the output…](https://sms4smile.com/quotes/oyvind-nydal-dahl/before-you-move-on-to-the-next-step-check-that-this-circuit-is/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Check for Bad and Good Beeps Now, plug your battery clip into the breadboard as you would normally, but without the battery. Touch one…](https://sms4smile.com/quotes/oyvind-nydal-dahl/check-for-bad-and-good-beeps-now-plug-your-battery-clip-into-the/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Step 4: Use the Capacitor to Light the LED Watch the LED while removing the battery. The LED shouldn’t turn off right away when…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-4-use-the-capacitor-to-light-the-led-watch-the-led-while/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Shopping List A breadboard (Jameco #2212218, Bitsbox #CN204) with at least 60 rows. Breadboard jumper wires (Jameco #2237044, Bitsbox #CN236)—you’ll need around 35 for…](https://sms4smile.com/quotes/oyvind-nydal-dahl/shopping-list-a-breadboard-jameco-2212218-bitsbox-cn204-with-at-least/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Check for Power If the connection to the NAND-gate IC is correct, use a multimeter to measure the output voltage from the start/stop circuit…](https://sms4smile.com/quotes/oyvind-nydal-dahl/check-for-power-if-the-connection-to-the-nand-gate-ic-is-correct-use/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“A Counter to Turn the LEDs On To control the LEDs, you’ll use a decade counter, which is an IC that counts input pulses.…](https://sms4smile.com/quotes/oyvind-nydal-dahl/a-counter-to-turn-the-leds-on-to-control-the-leds-you-ll-use-a-decade/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Step 5: What If the Game Isn’t Working? If you’ve followed my instructions so far, the circuits from Steps 1 and 2 should be…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-5-what-if-the-game-isn-t-working-if-you-ve-followed-my/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Step 2: Add the Capacitor Connect your capacitor to the battery. Because the capacitor is polarized, place the pin marked with a minus sign…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-2-add-the-capacitor-connect-your-capacitor-to-the-battery/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Tools A wire cutter (Jameco #35482, Bitsbox #TL008) to cut small pieces of wire. A multimeter (Jameco #2206061, Bitsbox #TL057, Rapid Electronics #55-6662) to…](https://sms4smile.com/quotes/oyvind-nydal-dahl/tools-a-wire-cutter-jameco-35482-bitsbox-tl008-to-cut-small-pieces-of/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“CHECKING CONNECTIONS AS A TEAM Finding circuit problems is called debugging, and it’s easier to do with some help. When you get stuck, ask…](https://sms4smile.com/quotes/oyvind-nydal-dahl/checking-connections-as-a-team-finding-circuit-problems-is-called/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

[Explore all 28 Oyvind Nydal Dahl quotes ](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

## More Long jump quotes

> [In meditation you withdraw from others and focus your attention inside to gain purity of mind and wisdom energy. Then you must become extroverted…](https://sms4smile.com/quotes/s-n-goenka/in-meditation-you-withdraw-from-others-and-focus-your-attention/)

[S. N. Goenka](https://sms4smile.com/quotes/author/s-n-goenka/)

> [I know I'm a dog. I'm a beast especially when it comes to long jump.](https://sms4smile.com/quotes/marquise-goodwin/i-know-i-m-a-dog-i-m-a-beast-especially-when-it-comes-to-long-jump/)

[Marquise Goodwin](https://sms4smile.com/quotes/author/marquise-goodwin/)

> [I used to wear long jumpers, but they made me look like a bag tied up in the middle.](https://sms4smile.com/quotes/darcey-bussell/i-used-to-wear-long-jumpers-but-they-made-me-look-like-a-bag-tied-up/)

[Darcey Bussell](https://sms4smile.com/quotes/author/darcey-bussell/)

> [My participation in the Art of the Olympians is a natural extension of my athletic career. I find creating a piece of art in…](https://sms4smile.com/quotes/bob-beamon/my-participation-in-the-art-of-the-olympians-is-a-natural-extension/)

[Bob Beamon](https://sms4smile.com/quotes/author/bob-beamon/)

> [I led the world the whole year until the trials. I was in Birmingham, U.K. Broke the meet record, had the meet won already,…](https://sms4smile.com/quotes/marquise-goodwin/i-led-the-world-the-whole-year-until-the-trials-i-was-in-birmingham-u/)

[Marquise Goodwin](https://sms4smile.com/quotes/author/marquise-goodwin/)

> [I got a third-degree ankle sprain practicing long jump. I never fully recovered. That was my first heartbreak. I thought track was going to…](https://sms4smile.com/quotes/michelle-wolf/i-got-a-third-degree-ankle-sprain-practicing-long-jump-i-never-fully/)

[Michelle Wolf](https://sms4smile.com/quotes/author/michelle-wolf/)

> [I've been blessed with the athleticism that I've got. I've worked a little bit to try and fine-tune certain aspects - my pace, leap,…](https://sms4smile.com/quotes/dominic-calvert-lewin/i-ve-been-blessed-with-the-athleticism-that-i-ve-got-i-ve-worked-a/)

[Dominic Calvert-Lewin](https://sms4smile.com/quotes/author/dominic-calvert-lewin/)

> [I think what Kanye West is going to mean is something similar to what Steve Jobs means.](https://sms4smile.com/quotes/kanye-west/i-think-what-kanye-west-is-going-to-mean-is-something-similar-to-what/)

[Kanye West](https://sms4smile.com/quotes/author/kanye-west/)

> [To be honest, I was focusing more on playing for Godmanchester Rovers than I was doing the long jump for England.](https://sms4smile.com/quotes/darren-bent/to-be-honest-i-was-focusing-more-on-playing-for-godmanchester-rovers/)

[Darren Bent](https://sms4smile.com/quotes/author/darren-bent/)

> [I honestly feel that because Steve has passed, you know, it's like when Biggie passed and Jay-Z was allowed to become Jay-Z.](https://sms4smile.com/quotes/kanye-west/i-honestly-feel-that-because-steve-has-passed-you-know-it-s-like-when/)

[Kanye West](https://sms4smile.com/quotes/author/kanye-west/)

> [In England I played everything - swimming, athletics, football, rugby, badminton, cricket - all of that stuff. I was in the first teams for…](https://sms4smile.com/quotes/chris-eubank-jr/in-england-i-played-everything-swimming-athletics-football-rugby/)

[Chris Eubank Jr](https://sms4smile.com/quotes/author/chris-eubank-jr/)

> [Monkey can make a long jump with his muscles; and man, with his wisdom!](https://sms4smile.com/quotes/mehmet-murat-ildan/monkey-can-make-a-long-jump-with-his-muscles-and-man-with-his-wisdom/)

[Mehmet Murat Ildan](https://sms4smile.com/quotes/author/mehmet-murat-ildan/)

> [We always spend more time on the throwing events and a little bit more on the long jump. They're my weaker events - they…](https://sms4smile.com/quotes/jessica-ennis/we-always-spend-more-time-on-the-throwing-events-and-a-little-bit/)

[Jessica Ennis](https://sms4smile.com/quotes/author/jessica-ennis/)

> [We crave instant success these days. If you are a really good sprinter and long jumper, you don't want to spend two or three…](https://sms4smile.com/quotes/daley-thompson/we-crave-instant-success-these-days-if-you-are-a-really-good-sprinter/)

[Daley Thompson](https://sms4smile.com/quotes/author/daley-thompson/)

> [ I have seen quite a few folk whom I know to be both fair minded and, as it happens,\[Bob\] Dylan fans, take up cudgels… ](https://sms4smile.com/quotes/david-bennun/i-have-seen-quite-a-few-folk-whom-i-know-to-be-both-fair-minded-and/)

[David Bennun](https://sms4smile.com/quotes/author/david-bennun/)

[Browse all 39 Long jump quotes ](https://sms4smile.com/quotes/about/long-jump/)

```json
{
    "@context": "https://schema.org",
    "@graph": [
        {
            "@type": "Quotation",
            "text": "“Step 2: Build the LED-Controlling Circuit Now, you’re going to connect the 4017 decade counter with resistors and LEDs. There are a lot of connections, so take as much time as you need to get them all correct. Plug the 4017 decade counter into the breadboard so that the middle of the decade counter is around row 20, with the chip marker pointing up toward row 1. Then, take out five LEDs and ten 100 Ω resistors. Connect each LED’s negative (short) leg to the negative supply column on the right, and connect each positive (long) leg to its own empty row in the component area on the right. Place the green LED in the middle, the two blue ones on each side of the green LED, and the red ones on each end. Then, connect the ten 100 Ω resistors. In the circuit diagram, notice that pins 1 to 7 and pins 9 to 11 of the 4017 decade counter each connect to one side of a resistor. The other side of each resistor needs to be on a row by itself. Take care to ensure the resistor legs don’t accidentally touch one another. Look at the following breadboard circuit to see how I connected them: Now, connect the LEDs to the resistors on the 4017 decade counter, and connect the decade counter circuit to the 555 timer circuit according to the circuit diagram. Jumper wires are the best way to make those connections. From each resistor, connect a jumper wire to the corresponding LED. Look at the circuit diagram and notice, for example, that the other side of the resistor connected to pin 4 of the 4017 decade counter should connect to the positive pin of the green LED in the middle. Go through the pins in the circuit diagram to figure out which LED to connect each resistor to. Connect pins 8 and 15 of the 4017 decade counter to the negative supply column, and connect pin 16 to the positive supply column. Use a wire to connect the output from the 555 timer (pin 3) to the clock input of the 4017 decade counter (pin 14). Make sure that you have positive and negative connections in all of your power supply columns. The breadboard I recommend in this project’s Shopping List (page 267) divides its power supply columns into two sections, one upper and one lower. Just connect each of the upper and lower halves on the left side with a wire to bridge the gap, as shown. Do the same on the right side. Alternatively, use two jumper wires from the left columns to the right columns. You can use a jumper wire, or you can cut off a small piece of wire, as I’ve done in this photo. Then, use two long jumper wires to connect the lower-left power supply columns with the two lower-right columns. When you’re done connecting the two circuits and all the power supply columns, your breadboard should look like this:”",
            "creator": {
                "@type": "Person",
                "name": "Oyvind Nydal Dahl"
            },
            "isPartOf": {
                "@id": "https://sms4smile.com/quotes/#website"
            },
            "url": "https://sms4smile.com/quotes/oyvind-nydal-dahl/step-2-build-the-led-controlling-circuit-now-you-re-going-to-connect/",
            "about": {
                "@type": "Thing",
                "name": "Long jump"
            },
            "@id": "https://sms4smile.com/quotes/oyvind-nydal-dahl/step-2-build-the-led-controlling-circuit-now-you-re-going-to-connect/#quotation",
            "image": {
                "@type": "ImageObject",
                "@id": "https://sms4smile.com/quotes/i/772/oyvind-nydal-dahl-21883_long-jump_step-2-build-the-led-controlling-circuit_2650352.jpg",
                "contentUrl": "https://sms4smile.com/quotes/i/772/oyvind-nydal-dahl-21883_long-jump_step-2-build-the-led-controlling-circuit_2650352.jpg",
                "url": "https://sms4smile.com/quotes/i/772/oyvind-nydal-dahl-21883_long-jump_step-2-build-the-led-controlling-circuit_2650352.jpg",
                "width": 1080,
                "height": 1080,
                "caption": "“Step 2: Build the LED-Controlling Circuit Now, you’re going to connect the 4017 decade counter with…” — Oyvind Nydal Dahl",
                "creditText": "SMS4Smile Quotes",
                "creator": {
                    "@id": "https://sms4smile.com/quotes/#organization"
                }
            }
        },
        {
            "@type": "BreadcrumbList",
            "itemListElement": [
                {
                    "@type": "ListItem",
                    "position": 1,
                    "name": "Home",
                    "item": "https://sms4smile.com/"
                },
                {
                    "@type": "ListItem",
                    "position": 2,
                    "name": "Quotes",
                    "item": "https://sms4smile.com/quotes/"
                },
                {
                    "@type": "ListItem",
                    "position": 3,
                    "name": "Oyvind Nydal Dahl",
                    "item": "https://sms4smile.com/quotes/author/oyvind-nydal-dahl/"
                },
                {
                    "@type": "ListItem",
                    "position": 4,
                    "name": "“Step 2: Build the LED-Controlling Circuit...",
                    "item": "https://sms4smile.com/quotes/oyvind-nydal-dahl/step-2-build-the-led-controlling-circuit-now-you-re-going-to-connect/"
                }
            ],
            "@id": "https://sms4smile.com/quotes/oyvind-nydal-dahl/step-2-build-the-led-controlling-circuit-now-you-re-going-to-connect/#breadcrumb"
        },
        {
            "@type": "WebSite",
            "@id": "https://sms4smile.com/quotes/#website",
            "name": "SMS4Smile Quotes",
            "url": "https://sms4smile.com/quotes/",
            "publisher": {
                "@id": "https://sms4smile.com/quotes/#organization"
            }
        },
        {
            "@type": "Organization",
            "@id": "https://sms4smile.com/quotes/#organization",
            "name": "SMS4Smile Quotes",
            "url": "https://sms4smile.com/quotes/",
            "logo": {
                "@type": "ImageObject",
                "url": "https://sms4smile.com/quotes/wp-content/themes/sq/assets/icons/icon-512.png",
                "width": 512,
                "height": 512
            }
        }
    ]
}
```
