---
title: "2 Right side Quotes By Oyvind Nydal Dahl"
description: "2 Right side quotes by Oyvind Nydal Dahl. Plus more from Oyvind Nydal Dahl and more Right side sayings from other authors."
image: "https://sms4smile.com/quotes/i/7bc/oyvind-nydal-dahl-21883_left-and-right_step-1-build-the-555-timer-circuit-plug_1885836.jpg"
---

> [“Step 1: Build the 555 Timer Circuit Plug the 555 timer into the breadboard all the way at the top so that you’ll have room for the other parts of the circuits farther down. Then, connect the capacitors and resistors…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-1-build-the-555-timer-circuit-plug-the-555-timer-into-the/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

[Image](https://sms4smile.com/quotes/i/7bc/oyvind-nydal-dahl-21883_left-and-right_step-1-build-the-555-timer-circuit-plug_1885836.jpg)

> [“Step 2: Build the LED-Controlling Circuit Now, you’re going to connect the 4017 decade counter with resistors and LEDs. There are a lot of connections, so take as much time as you need to get them all correct. Plug the…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-2-build-the-led-controlling-circuit-now-you-re-going-to-connect/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

[Image](https://sms4smile.com/quotes/i/772/oyvind-nydal-dahl-21883_long-jump_step-2-build-the-led-controlling-circuit_2650352.jpg)

## Other authors on Right side

## More by Oyvind Nydal Dahl

> [“Check the Continuity First, check that you don’t have a short circuit between the positive and negative columns. To do this, use the continuity…](https://sms4smile.com/quotes/oyvind-nydal-dahl/check-the-continuity-first-check-that-you-don-t-have-a-short-circuit/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Step 4: Practice Your Reaction Time! All that’s left is to connect the battery to the supply columns. The button at the bottom of…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-4-practice-your-reaction-time-all-that-s-left-is-to-connect-the/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“NOTE Many electronics enthusiasts also call continuity mode beep mode.”](https://sms4smile.com/quotes/oyvind-nydal-dahl/note-many-electronics-enthusiasts-also-call-continuity-mode-beep-mode/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“MEET THE REACTION GAME CIRCUITS The reaction game will consist of three circuits: A 555 timer circuit that determines the speed of the game…](https://sms4smile.com/quotes/oyvind-nydal-dahl/meet-the-reaction-game-circuits-the-reaction-game-will-consist-of/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“ADD A BUZZER TO YOUR GAME Congratulations: You’ve finished the last project in the book! Now, it’s up to you to decide what to…](https://sms4smile.com/quotes/oyvind-nydal-dahl/add-a-buzzer-to-your-game-congratulations-you-ve-finished-the-last/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Before you move on to the next step, check that this circuit is working by connecting an LED with a resistor to the output…](https://sms4smile.com/quotes/oyvind-nydal-dahl/before-you-move-on-to-the-next-step-check-that-this-circuit-is/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Check for Bad and Good Beeps Now, plug your battery clip into the breadboard as you would normally, but without the battery. Touch one…](https://sms4smile.com/quotes/oyvind-nydal-dahl/check-for-bad-and-good-beeps-now-plug-your-battery-clip-into-the/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Step 4: Use the Capacitor to Light the LED Watch the LED while removing the battery. The LED shouldn’t turn off right away when…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-4-use-the-capacitor-to-light-the-led-watch-the-led-while/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Shopping List A breadboard (Jameco #2212218, Bitsbox #CN204) with at least 60 rows. Breadboard jumper wires (Jameco #2237044, Bitsbox #CN236)—you’ll need around 35 for…](https://sms4smile.com/quotes/oyvind-nydal-dahl/shopping-list-a-breadboard-jameco-2212218-bitsbox-cn204-with-at-least/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Check for Power If the connection to the NAND-gate IC is correct, use a multimeter to measure the output voltage from the start/stop circuit…](https://sms4smile.com/quotes/oyvind-nydal-dahl/check-for-power-if-the-connection-to-the-nand-gate-ic-is-correct-use/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“A Counter to Turn the LEDs On To control the LEDs, you’ll use a decade counter, which is an IC that counts input pulses.…](https://sms4smile.com/quotes/oyvind-nydal-dahl/a-counter-to-turn-the-leds-on-to-control-the-leds-you-ll-use-a-decade/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Step 5: What If the Game Isn’t Working? If you’ve followed my instructions so far, the circuits from Steps 1 and 2 should be…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-5-what-if-the-game-isn-t-working-if-you-ve-followed-my/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Step 2: Add the Capacitor Connect your capacitor to the battery. Because the capacitor is polarized, place the pin marked with a minus sign…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-2-add-the-capacitor-connect-your-capacitor-to-the-battery/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Tools A wire cutter (Jameco #35482, Bitsbox #TL008) to cut small pieces of wire. A multimeter (Jameco #2206061, Bitsbox #TL057, Rapid Electronics #55-6662) to…](https://sms4smile.com/quotes/oyvind-nydal-dahl/tools-a-wire-cutter-jameco-35482-bitsbox-tl008-to-cut-small-pieces-of/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“CHECKING CONNECTIONS AS A TEAM Finding circuit problems is called debugging, and it’s easier to do with some help. When you get stuck, ask…](https://sms4smile.com/quotes/oyvind-nydal-dahl/checking-connections-as-a-team-finding-circuit-problems-is-called/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

```json
{
    "@context": "https://schema.org",
    "@graph": [
        {
            "@type": "ItemList",
            "@id": "https://sms4smile.com/quotes/about/right-side/oyvind-nydal-dahl/#itemlist",
            "name": "2 Right side Quotes By Oyvind Nydal Dahl",
            "numberOfItems": 2,
            "itemListElement": [
                {
                    "@type": "ListItem",
                    "position": 1,
                    "item": {
                        "@type": "Quotation",
                        "text": "“Step 1: Build the 555 Timer Circuit Plug the 555 timer into the breadboard all the way at the top so that you’ll have room for the other parts of the circuits farther down. Then, connect the capacitors and resistors to the IC according to this project’s circuit diagram. The capacitor I suggest in this project’s Shopping List is a nonpolarized capacitor, so it doesn’t matter which way you connect it. If you use a polarized capacitor instead, connect it according to the plus marking in the circuit diagram. Use wires to make connections as needed, as I show in this breadboard diagram. In this project, it’s best to use the supply column pairs on both sides to make connections easier and keep everything as tidy as possible. The breadboard that I recommend in this project’s Shopping List doesn’t have blue and red markings, but the positive and negative columns are the same as in breadboards with the stripes. The left and right sides of the breadboard each have a pair of supply columns. The positive supply column is the left column in each pair, and the negative supply column is the right column in each pair. Use a red wire to connect the positive column on one side to the positive column on the other side, and do the same using a black wire with the negative columns. As you follow my instructions, connect everything in the 555 timer circuit that should connect to VCC to one of the positive supply columns, and connect everything that should connect to GND to one of the negative supply columns.”",
                        "creator": {
                            "@type": "Person",
                            "name": "Oyvind Nydal Dahl"
                        },
                        "url": "https://sms4smile.com/quotes/oyvind-nydal-dahl/step-1-build-the-555-timer-circuit-plug-the-555-timer-into-the/",
                        "image": {
                            "@type": "ImageObject",
                            "@id": "https://sms4smile.com/quotes/i/7bc/oyvind-nydal-dahl-21883_left-and-right_step-1-build-the-555-timer-circuit-plug_1885836.jpg",
                            "contentUrl": "https://sms4smile.com/quotes/i/7bc/oyvind-nydal-dahl-21883_left-and-right_step-1-build-the-555-timer-circuit-plug_1885836.jpg",
                            "url": "https://sms4smile.com/quotes/i/7bc/oyvind-nydal-dahl-21883_left-and-right_step-1-build-the-555-timer-circuit-plug_1885836.jpg",
                            "width": 1080,
                            "height": 1080,
                            "caption": "“Step 1: Build the 555 Timer Circuit Plug the 555 timer into the breadboard all the way at the top so that…” — Oyvind Nydal Dahl",
                            "creditText": "SMS4Smile Quotes",
                            "creator": {
                                "@id": "https://sms4smile.com/quotes/#organization"
                            }
                        }
                    }
                },
                {
                    "@type": "ListItem",
                    "position": 2,
                    "item": {
                        "@type": "Quotation",
                        "text": "“Step 2: Build the LED-Controlling Circuit Now, you’re going to connect the 4017 decade counter with resistors and LEDs. There are a lot of connections, so take as much time as you need to get them all correct. Plug the 4017 decade counter into the breadboard so that the middle of the decade counter is around row 20, with the chip marker pointing up toward row 1. Then, take out five LEDs and ten 100 Ω resistors. Connect each LED’s negative (short) leg to the negative supply column on the right, and connect each positive (long) leg to its own empty row in the component area on the right. Place the green LED in the middle, the two blue ones on each side of the green LED, and the red ones on each end. Then, connect the ten 100 Ω resistors. In the circuit diagram, notice that pins 1 to 7 and pins 9 to 11 of the 4017 decade counter each connect to one side of a resistor. The other side of each resistor needs to be on a row by itself. Take care to ensure the resistor legs don’t accidentally touch one another. Look at the following breadboard circuit to see how I connected them: Now, connect the LEDs to the resistors on the 4017 decade counter, and connect the decade counter circuit to the 555 timer circuit according to the circuit diagram. Jumper wires are the best way to make those connections. From each resistor, connect a jumper wire to the corresponding LED. Look at the circuit diagram and notice, for example, that the other side of the resistor connected to pin 4 of the 4017 decade counter should connect to the positive pin of the green LED in the middle. Go through the pins in the circuit diagram to figure out which LED to connect each resistor to. Connect pins 8 and 15 of the 4017 decade counter to the negative supply column, and connect pin 16 to the positive supply column. Use a wire to connect the output from the 555 timer (pin 3) to the clock input of the 4017 decade counter (pin 14). Make sure that you have positive and negative connections in all of your power supply columns. The breadboard I recommend in this project’s Shopping List (page 267) divides its power supply columns into two sections, one upper and one lower. Just connect each of the upper and lower halves on the left side with a wire to bridge the gap, as shown. Do the same on the right side. Alternatively, use two jumper wires from the left columns to the right columns. You can use a jumper wire, or you can cut off a small piece of wire, as I’ve done in this photo. Then, use two long jumper wires to connect the lower-left power supply columns with the two lower-right columns. When you’re done connecting the two circuits and all the power supply columns, your breadboard should look like this:”",
                        "creator": {
                            "@type": "Person",
                            "name": "Oyvind Nydal Dahl"
                        },
                        "url": "https://sms4smile.com/quotes/oyvind-nydal-dahl/step-2-build-the-led-controlling-circuit-now-you-re-going-to-connect/",
                        "image": {
                            "@type": "ImageObject",
                            "@id": "https://sms4smile.com/quotes/i/772/oyvind-nydal-dahl-21883_long-jump_step-2-build-the-led-controlling-circuit_2650352.jpg",
                            "contentUrl": "https://sms4smile.com/quotes/i/772/oyvind-nydal-dahl-21883_long-jump_step-2-build-the-led-controlling-circuit_2650352.jpg",
                            "url": "https://sms4smile.com/quotes/i/772/oyvind-nydal-dahl-21883_long-jump_step-2-build-the-led-controlling-circuit_2650352.jpg",
                            "width": 1080,
                            "height": 1080,
                            "caption": "“Step 2: Build the LED-Controlling Circuit Now, you’re going to connect the 4017 decade counter with…” — Oyvind Nydal Dahl",
                            "creditText": "SMS4Smile Quotes",
                            "creator": {
                                "@id": "https://sms4smile.com/quotes/#organization"
                            }
                        }
                    }
                }
            ]
        },
        {
            "@type": "CollectionPage",
            "@id": "https://sms4smile.com/quotes/about/right-side/oyvind-nydal-dahl/#webpage",
            "url": "https://sms4smile.com/quotes/about/right-side/oyvind-nydal-dahl/",
            "name": "Right side Quotes by Oyvind Nydal Dahl",
            "isPartOf": {
                "@id": "https://sms4smile.com/quotes/#website"
            },
            "mainEntity": {
                "@id": "https://sms4smile.com/quotes/about/right-side/oyvind-nydal-dahl/#itemlist"
            },
            "primaryImageOfPage": {
                "@id": "https://sms4smile.com/quotes/i/7bc/oyvind-nydal-dahl-21883_left-and-right_step-1-build-the-555-timer-circuit-plug_1885836.jpg"
            },
            "description": "2 Right side quotes by Oyvind Nydal Dahl. Plus more from Oyvind Nydal Dahl and more Right side sayings from other authors.",
            "breadcrumb": {
                "@id": "https://sms4smile.com/quotes/about/right-side/oyvind-nydal-dahl/#breadcrumb"
            }
        },
        {
            "@type": "BreadcrumbList",
            "@id": "https://sms4smile.com/quotes/about/right-side/oyvind-nydal-dahl/#breadcrumb",
            "itemListElement": [
                {
                    "@type": "ListItem",
                    "position": 1,
                    "name": "Home",
                    "item": "https://sms4smile.com/"
                },
                {
                    "@type": "ListItem",
                    "position": 2,
                    "name": "Quotes",
                    "item": "https://sms4smile.com/quotes/"
                },
                {
                    "@type": "ListItem",
                    "position": 3,
                    "name": "Topics",
                    "item": "https://sms4smile.com/quotes/categories/"
                },
                {
                    "@type": "ListItem",
                    "position": 4,
                    "name": "Right Side",
                    "item": "https://sms4smile.com/quotes/about/right-side/"
                },
                {
                    "@type": "ListItem",
                    "position": 5,
                    "name": "Oyvind Nydal Dahl",
                    "item": "https://sms4smile.com/quotes/about/right-side/oyvind-nydal-dahl/"
                }
            ]
        },
        {
            "@type": "WebSite",
            "@id": "https://sms4smile.com/quotes/#website",
            "name": "SMS4Smile Quotes",
            "url": "https://sms4smile.com/quotes/",
            "publisher": {
                "@id": "https://sms4smile.com/quotes/#organization"
            }
        },
        {
            "@type": "Organization",
            "@id": "https://sms4smile.com/quotes/#organization",
            "name": "SMS4Smile Quotes",
            "url": "https://sms4smile.com/quotes/",
            "logo": {
                "@type": "ImageObject",
                "url": "https://sms4smile.com/quotes/wp-content/themes/sq/assets/icons/icon-512.png",
                "width": 512,
                "height": 512
            }
        }
    ]
}
```
