---
title: "2 Next step Quotes By Oyvind Nydal Dahl"
description: "2 Next step quotes by Oyvind Nydal Dahl. Plus more from Oyvind Nydal Dahl and more Next step sayings from other authors."
image: "https://sms4smile.com/quotes/i/e46/oyvind-nydal-dahl-21883_next-step_before-you-move-on-to-the-next-step-chec_479634.jpg"
---

> [“Before you move on to the next step, check that this circuit is working by connecting an LED with a resistor to the output of the 555 timer as follows: Connect the negative side (short leg) of an LED to…](https://sms4smile.com/quotes/oyvind-nydal-dahl/before-you-move-on-to-the-next-step-check-that-this-circuit-is/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

[Image](https://sms4smile.com/quotes/i/e46/oyvind-nydal-dahl-21883_next-step_before-you-move-on-to-the-next-step-chec_479634.jpg)

> [“Step 1: Start with the LED Circuit Follow the instructions from “Project #9: Your First Breadboard Circuit” on page 84, making sure you end up with a working circuit that lights an LED. Then, disconnect the battery and move on…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-1-start-with-the-led-circuit-follow-the-instructions-from/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

[Image](https://sms4smile.com/quotes/i/3ad/oyvind-nydal-dahl-21883_next-step_step-1-start-with-the-led-circuit-follow_2661810.jpg)

## Other authors on Next step

- [ ![](https://sms4smile.com/quotes/wp-content/uploads/sms4s/authors/processed/b005/author-bob-goff-18578.jpg) Bob Goff 5 quotes ](https://sms4smile.com/quotes/about/next-step/bob-goff/)

## More by Oyvind Nydal Dahl

> [“Check the Continuity First, check that you don’t have a short circuit between the positive and negative columns. To do this, use the continuity…](https://sms4smile.com/quotes/oyvind-nydal-dahl/check-the-continuity-first-check-that-you-don-t-have-a-short-circuit/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Step 4: Practice Your Reaction Time! All that’s left is to connect the battery to the supply columns. The button at the bottom of…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-4-practice-your-reaction-time-all-that-s-left-is-to-connect-the/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“NOTE Many electronics enthusiasts also call continuity mode beep mode.”](https://sms4smile.com/quotes/oyvind-nydal-dahl/note-many-electronics-enthusiasts-also-call-continuity-mode-beep-mode/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“MEET THE REACTION GAME CIRCUITS The reaction game will consist of three circuits: A 555 timer circuit that determines the speed of the game…](https://sms4smile.com/quotes/oyvind-nydal-dahl/meet-the-reaction-game-circuits-the-reaction-game-will-consist-of/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“ADD A BUZZER TO YOUR GAME Congratulations: You’ve finished the last project in the book! Now, it’s up to you to decide what to…](https://sms4smile.com/quotes/oyvind-nydal-dahl/add-a-buzzer-to-your-game-congratulations-you-ve-finished-the-last/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Before you move on to the next step, check that this circuit is working by connecting an LED with a resistor to the output…](https://sms4smile.com/quotes/oyvind-nydal-dahl/before-you-move-on-to-the-next-step-check-that-this-circuit-is/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Check for Bad and Good Beeps Now, plug your battery clip into the breadboard as you would normally, but without the battery. Touch one…](https://sms4smile.com/quotes/oyvind-nydal-dahl/check-for-bad-and-good-beeps-now-plug-your-battery-clip-into-the/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Step 4: Use the Capacitor to Light the LED Watch the LED while removing the battery. The LED shouldn’t turn off right away when…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-4-use-the-capacitor-to-light-the-led-watch-the-led-while/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Shopping List A breadboard (Jameco #2212218, Bitsbox #CN204) with at least 60 rows. Breadboard jumper wires (Jameco #2237044, Bitsbox #CN236)—you’ll need around 35 for…](https://sms4smile.com/quotes/oyvind-nydal-dahl/shopping-list-a-breadboard-jameco-2212218-bitsbox-cn204-with-at-least/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Check for Power If the connection to the NAND-gate IC is correct, use a multimeter to measure the output voltage from the start/stop circuit…](https://sms4smile.com/quotes/oyvind-nydal-dahl/check-for-power-if-the-connection-to-the-nand-gate-ic-is-correct-use/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“A Counter to Turn the LEDs On To control the LEDs, you’ll use a decade counter, which is an IC that counts input pulses.…](https://sms4smile.com/quotes/oyvind-nydal-dahl/a-counter-to-turn-the-leds-on-to-control-the-leds-you-ll-use-a-decade/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Step 5: What If the Game Isn’t Working? If you’ve followed my instructions so far, the circuits from Steps 1 and 2 should be…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-5-what-if-the-game-isn-t-working-if-you-ve-followed-my/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Step 2: Add the Capacitor Connect your capacitor to the battery. Because the capacitor is polarized, place the pin marked with a minus sign…](https://sms4smile.com/quotes/oyvind-nydal-dahl/step-2-add-the-capacitor-connect-your-capacitor-to-the-battery/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“Tools A wire cutter (Jameco #35482, Bitsbox #TL008) to cut small pieces of wire. A multimeter (Jameco #2206061, Bitsbox #TL057, Rapid Electronics #55-6662) to…](https://sms4smile.com/quotes/oyvind-nydal-dahl/tools-a-wire-cutter-jameco-35482-bitsbox-tl008-to-cut-small-pieces-of/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

> [“CHECKING CONNECTIONS AS A TEAM Finding circuit problems is called debugging, and it’s easier to do with some help. When you get stuck, ask…](https://sms4smile.com/quotes/oyvind-nydal-dahl/checking-connections-as-a-team-finding-circuit-problems-is-called/)

[Oyvind Nydal Dahl](https://sms4smile.com/quotes/author/oyvind-nydal-dahl/)

```json
{
    "@context": "https://schema.org",
    "@graph": [
        {
            "@type": "ItemList",
            "@id": "https://sms4smile.com/quotes/about/next-step/oyvind-nydal-dahl/#itemlist",
            "name": "2 Next step Quotes By Oyvind Nydal Dahl",
            "numberOfItems": 2,
            "itemListElement": [
                {
                    "@type": "ListItem",
                    "position": 1,
                    "item": {
                        "@type": "Quotation",
                        "text": "“Before you move on to the next step, check that this circuit is working by connecting an LED with a resistor to the output of the 555 timer as follows: Connect the negative side (short leg) of an LED to the output on pin 3 of the 555 timer. Connect the positive side (long leg) of the LED to a 100 Ω resistor, and connect the other side of this resistor to the positive supply column. Connect your battery clip to one of the supply column pairs as usual. Then plug in the battery to check that the circuit works. If your LED blinks really fast, then you’re ready to move on. If not, recheck your connections to find out where the error is. When you know the 555 timer circuit works, unplug the LED, 100 Ω resistor, and battery clip.”",
                        "creator": {
                            "@type": "Person",
                            "name": "Oyvind Nydal Dahl"
                        },
                        "url": "https://sms4smile.com/quotes/oyvind-nydal-dahl/before-you-move-on-to-the-next-step-check-that-this-circuit-is/",
                        "image": {
                            "@type": "ImageObject",
                            "@id": "https://sms4smile.com/quotes/i/e46/oyvind-nydal-dahl-21883_next-step_before-you-move-on-to-the-next-step-chec_479634.jpg",
                            "contentUrl": "https://sms4smile.com/quotes/i/e46/oyvind-nydal-dahl-21883_next-step_before-you-move-on-to-the-next-step-chec_479634.jpg",
                            "url": "https://sms4smile.com/quotes/i/e46/oyvind-nydal-dahl-21883_next-step_before-you-move-on-to-the-next-step-chec_479634.jpg",
                            "width": 1080,
                            "height": 1080,
                            "caption": "“Before you move on to the next step, check that this circuit is working by connecting an LED with a resistor…” — Oyvind Nydal Dahl",
                            "creditText": "SMS4Smile Quotes",
                            "creator": {
                                "@id": "https://sms4smile.com/quotes/#organization"
                            }
                        }
                    }
                },
                {
                    "@type": "ListItem",
                    "position": 2,
                    "item": {
                        "@type": "Quotation",
                        "text": "“Step 1: Start with the LED Circuit Follow the instructions from “Project #9: Your First Breadboard Circuit” on page 84, making sure you end up with a working circuit that lights an LED. Then, disconnect the battery and move on to the next step.”",
                        "creator": {
                            "@type": "Person",
                            "name": "Oyvind Nydal Dahl"
                        },
                        "url": "https://sms4smile.com/quotes/oyvind-nydal-dahl/step-1-start-with-the-led-circuit-follow-the-instructions-from/",
                        "image": {
                            "@type": "ImageObject",
                            "@id": "https://sms4smile.com/quotes/i/3ad/oyvind-nydal-dahl-21883_next-step_step-1-start-with-the-led-circuit-follow_2661810.jpg",
                            "contentUrl": "https://sms4smile.com/quotes/i/3ad/oyvind-nydal-dahl-21883_next-step_step-1-start-with-the-led-circuit-follow_2661810.jpg",
                            "url": "https://sms4smile.com/quotes/i/3ad/oyvind-nydal-dahl-21883_next-step_step-1-start-with-the-led-circuit-follow_2661810.jpg",
                            "width": 1080,
                            "height": 1080,
                            "caption": "“Step 1: Start with the LED Circuit Follow the instructions from “Project #9: Your First Breadboard Circuit”…” — Oyvind Nydal Dahl",
                            "creditText": "SMS4Smile Quotes",
                            "creator": {
                                "@id": "https://sms4smile.com/quotes/#organization"
                            }
                        }
                    }
                }
            ]
        },
        {
            "@type": "CollectionPage",
            "@id": "https://sms4smile.com/quotes/about/next-step/oyvind-nydal-dahl/#webpage",
            "url": "https://sms4smile.com/quotes/about/next-step/oyvind-nydal-dahl/",
            "name": "Next step Quotes by Oyvind Nydal Dahl",
            "isPartOf": {
                "@id": "https://sms4smile.com/quotes/#website"
            },
            "mainEntity": {
                "@id": "https://sms4smile.com/quotes/about/next-step/oyvind-nydal-dahl/#itemlist"
            },
            "primaryImageOfPage": {
                "@id": "https://sms4smile.com/quotes/i/e46/oyvind-nydal-dahl-21883_next-step_before-you-move-on-to-the-next-step-chec_479634.jpg"
            },
            "description": "2 Next step quotes by Oyvind Nydal Dahl. Plus more from Oyvind Nydal Dahl and more Next step sayings from other authors.",
            "breadcrumb": {
                "@id": "https://sms4smile.com/quotes/about/next-step/oyvind-nydal-dahl/#breadcrumb"
            }
        },
        {
            "@type": "BreadcrumbList",
            "@id": "https://sms4smile.com/quotes/about/next-step/oyvind-nydal-dahl/#breadcrumb",
            "itemListElement": [
                {
                    "@type": "ListItem",
                    "position": 1,
                    "name": "Home",
                    "item": "https://sms4smile.com/"
                },
                {
                    "@type": "ListItem",
                    "position": 2,
                    "name": "Quotes",
                    "item": "https://sms4smile.com/quotes/"
                },
                {
                    "@type": "ListItem",
                    "position": 3,
                    "name": "Topics",
                    "item": "https://sms4smile.com/quotes/categories/"
                },
                {
                    "@type": "ListItem",
                    "position": 4,
                    "name": "Next Step",
                    "item": "https://sms4smile.com/quotes/about/next-step/"
                },
                {
                    "@type": "ListItem",
                    "position": 5,
                    "name": "Oyvind Nydal Dahl",
                    "item": "https://sms4smile.com/quotes/about/next-step/oyvind-nydal-dahl/"
                }
            ]
        },
        {
            "@type": "WebSite",
            "@id": "https://sms4smile.com/quotes/#website",
            "name": "SMS4Smile Quotes",
            "url": "https://sms4smile.com/quotes/",
            "publisher": {
                "@id": "https://sms4smile.com/quotes/#organization"
            }
        },
        {
            "@type": "Organization",
            "@id": "https://sms4smile.com/quotes/#organization",
            "name": "SMS4Smile Quotes",
            "url": "https://sms4smile.com/quotes/",
            "logo": {
                "@type": "ImageObject",
                "url": "https://sms4smile.com/quotes/wp-content/themes/sq/assets/icons/icon-512.png",
                "width": 512,
                "height": 512
            }
        }
    ]
}
```
